Audi SQ2 battery replacement in Dubai
We replace the battery on the Audi SQ2 at your location in Dubai, Abu Dhabi and Sharjah, usually within 20 to 35 minutes of your call in Dubai. It takes a EFB or AGM battery (H5 or H6), located engine bay, left side. Fitting, coding and old battery removal are included, with up to 24 months warranty.
Audi SQ2 battery at a glance
- Battery location
- Engine bay, left side
- Battery type
- EFB or AGM
- Case size
- H5 or H6
- Capacity
- 59 to 70 Ah is typical
- Coding after fitting
- Needed on all versions
- Time on site
- About 25 minutes
- Model years covered
- 2019 to present
- Body style
- SUV or Sportback
Typical values. The exact battery depends on engine and year, and is confirmed before the van leaves.
What to know about the SQ2 battery
The SQ2 is mostly a city car in the UAE: short hops, valet parking, AC on from the first second. That duty cycle never lets the battery reach full charge. If start-stop has quietly stopped working on yours, the battery is the first thing to test.
As an S or RS model, the SQ2 runs bigger cooling fans, pumps and audio than the standard car, so it should get the AGM battery at the upper end of the capacity range, not the cheapest one that fits.
Battery brands that suit the SQ2
These are the brands we normally recommend for this model, in the type and size it takes.
Where is the battery on an Audi SQ2?
The Q2 and SQ2 carry the battery under the bonnet on the left, in the same position as the A3 it is based on.
Read moreWhat our technicians watch for on the SQ2
- Short urban trips keep it undercharged
- Engine-bay position means full summer heat
- EFB can be upgraded to AGM for longer life
Signs your SQ2 battery is on its way out
- Start-stop stops working or shows as unavailable
- The engine turns over more slowly on the first start of the day
- "Low battery" or "Electrical system" messages in the instrument cluster
- MMI or interior lights switch off sooner than they used to
- The battery is more than two UAE summers old
Audi SQ2 battery questions
Short answers. Anything else — WhatsApp us.
Should I upgrade my SQ2 from EFB to AGM?
It is a worthwhile upgrade if you do mostly short trips. AGM tolerates partial charge and heat better. We code the car to the new technology so it charges it correctly.
How long does it take to change a SQ2 battery?
About 25 minutes including the test and coding. The battery is easy to reach under the bonnet.
How fast can you replace an Audi battery in Dubai?
The nearest van usually reaches you in 20 to 35 minutes in Dubai, a little longer in outer Abu Dhabi and Sharjah. Fitting and coding take 25 to 45 minutes depending on where the battery sits in your model.
Does an Audi need battery coding after replacement?
Most Audis built from around 2008 do. The car's energy management has to be told a new battery is fitted, with its capacity and type. We do this on site with a diagnostic tool as part of the fitting.
How it works
No towing. No workshop. Just this:
On site: 25 to 45 minutes
-
Message us
Send your model, year and location pin on WhatsApp. We confirm the right battery before we drive out.
-
We drive over
Nearest van heads to you. In Dubai that is usually 20 to 35 minutes. You get the technician's number.
-
We test, then fit
Battery, alternator and drain test first. Needs just a jump? That is all you pay for. Needs a battery? We fit it and keep your settings.
-
We code and you pay
New battery coded to your Audi. You see the readings, pay by card, cash or Tabby, we take the old one.
Other models in the Q2 family
Where we replace SQ2 batteries
Anywhere in Dubai, Sharjah and Abu Dhabi city. These are the areas we are called to most for Audi.
What we do at your car
Won't start? We test it first. Jump, new battery, or nothing — you only pay for what it needs.
-
Battery replacement
The correct AGM or EFB for your model, fitted where the car is parked. Settings kept alive during the swap, old battery taken away.
Free delivery and fittingCoding to the carUp to 24 months warranty -
Jump start
A safe boost from a professional pack through the proper jump posts, followed by a test to see why it went flat.
Battery and alternator testSurge-protected boosterHonest advice after -
Battery testing
A printed-style reading of charge, health and cranking power, plus alternator output and standby drain. Takes about ten minutes.
State of health and chargeAlternator checkDrain check -
Battery coding
Registering the new battery in the car's energy management so charging, start-stop and warnings behave as Audi intended.
Capacity and type registeredFault memory clearedStart-stop restored
Get the right battery for your SQ2
Tech replies in minutes, any hour. You get an arrival time before you agree to anything.